Casablanca Fan Company Bellatm Bella Ceiling Fan User Manual download pdf (Page 8)

INSTALL BLADES

Step 10. Using the blade holder screws from

the pack, attach each blade/blade holder as-

sembly to the motor (two screws per blade).

Use the blade access hole to install the

screws.

Using the screwdriver, tighten securely by

hand only.

BLADE HOLDER

SCREW

Step 11. Using the two screws removed

in Step 9, reinstall the blade access plate

to the fan as shown.

Using the screwdriver tighten securely by

hand only.

BLADE ACCESS PLATE INSTALLATION

INSTALL HALOGEN BULB AND GLASS

Step 12. Screw the 100 Watt Halogen bulb into the socket.

Do not touch the glass bulb with your fingers–it is extremely

important that the glass be clean. If it is touched, or dirty,

clean carefully with a tissue. A dirty glass bulb will cause the

bulb to fail almost immediately.

Step 13. Position the indentations in the outer rim of the

glass shade so that they line up with the tabs on the inside

surface of the fan light fixture rim.

Step 14. Carefully lift the glass shade up inside the light

fixture as far as it will go.

Step 15. Rotate the shade in a clockwise direction until it is

held tightly in place by the three tabs.

TABS

GLASS

SHADE

GLASS SHADE

INDENTATION

IMPORTANT! When installing the halogen bulb, care-

fully cut off the end of the plastic sleeve the bulb

comes in and hold the bulb by the plastic sleeve to

screw it into the socket.

HALOGEN BULB

100 WATT

BELLA

™

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Casablanca Fan Company Bellatm Bella Ceiling Fan User Manual Page 8